Rub-On Transfer Sheet -Set 1

1. Prepare the Surface
Ensure the surface is clean, dry, smooth, and dust-free. For best results, apply on a primed and even surface. Wipe with a clean, dry cloth before application.

2. Cut the Desired Design
Carefully open the sheet and cut out the specific design you wish to use. Lay the sheet flat while working to prevent it from sticking to itself.

3. Position the Transfer
Remove the protective backing and place the transfer face down on your selected surface. Adjust the placement carefully. You may use masking tape to hold it in position if needed.

4. Apply Pressure
Using a clean cloth, applicator tool, wooden stick, or even a coin, rub firmly and evenly over the entire design. Make sure all areas receive proper pressure for a complete transfer.

5. Peel Carefully
Slowly lift one corner to check if the design has transferred completely. If any part remains, place the sheet back and rub again. Once fully transferred, gently peel away the sheet.

6. Allow to Set Let the design settle properly before touching or handling extensively.

7. Optional Sealing
For added durability — especially on furniture or frequently handled surfaces — apply a clear sealant or varnish to protect the design.